1. Ethernet uses a ------ bit static addressing scheme in which each device is assigned a unique address by the manufacturer.

2. In Point-to-Point topology there are two topologies.

3. ________ computes shortest paths in a graph by using weights on edges as a measure of distance

4. The term -------- is used to denote the definition of a packet used with a specific type of network.

5. A network uses a ------ if all computers attach to a central point

6. Computers attached to an Ethernet use ------ in which a computer waits for the ether to be idle before transmitting a frame.

7. An ------------method, the network hardware designers specify how type information is included in the frame and the value use to identify various frame types

8. The Fast Ethernet hardware operates at a rate of --------

9. A ---------- provide a mechanism that a customer can use to set a physical address

10. ATM assigns each VC a _____________ identifier that is divided two parts to produce a hierarchy

11. IEEE LLC/SNAP header is --------, which is used to specify the type of data.

12. FDDI can transmits data at a rate of ----------

13. ATM is designed to work on___________.

14. Unlike Frame Relay and ATM, SMDS (Switched multi-megabit Data service) offers_______

15. ------ has no way to determine the cause of the problem.

16. Most LANs that employ ring topology use an access mechanism known as-------

17. ---------- scheme, which is designed to help detect transmissions errors, send one extra bit of information with each character

18. In -------------, network occupies the smaller area like a room a floor or a building

19. Which of the following is a connecting device?

20. The next hop to which a packet is sent depends only on

21. The term----- ------- refers to the general concept of a small block of data

22. Unlike Frame Relay and ATM, SMDS (Switched multi-megabit Data service) offers_______

23. The product of delay and throughput measures the _____ of data that can be present on the network

24. One repeater _______, two repeaters ________ the maximum cable length limitation.

25. ------ Program sends a message to a remote computer and reports whether the computer responds.

26. Most WAN systems include a mechanism that can be used to eliminate the common case of duplication routing is called___________

27. -------------- have advantages arisen from the size and ease of computation

28. In ---------, network occupies larger areas like cities & countries.

29. A typical port on an ATM switch operates at __________ or higher.

30. Computer networks are often called -------------- because they use packet technology